ION RX-V750 Stereo Receiver User Manual


 
29
English
AUTO SETUP
PREPARATION
If a warning screen appears
1 Press j / i to display detailed information
about each warning.
For details about each message, see page 30.
y
Warnings let you know about potential problems detected
during auto setup. Warnings will not cancel the auto setup.
2 When you are finished, press SELECT.
The RESULT:EXIT screen appears.
3 Press u / d to select RESULT LIST, then
press SELECT.
The RESULT:WIRING screen appears.
Continue from step 8 on page 28 to display
each result.
If you change speakers, speaker positions, or the layout of your
listening environment, perform auto setup again to re-calibrate
your system.
If SWFR PHASE:REV appears in RESULT:WIRING, the SET
MENU “SUBWOOFER PHASE” parameter is automatically
set to REVERSE (see page 59).
In the DISTANCE results, the distance displayed may be longer
than the actual distance depending on the characteristics of your
subwoofer.
Notes
WARNING:W-1
<OUTOFPHASE>
ReverseChannel
FLFR
--
----
----
----
[<]/[>]:Select
[SELECT]:Return
RESULT:EXIT
WARNINGLIST
.RESULTLIST
)SETCANCEL
[]/[]:Up/Down
[SELECT]:Enter
p
p

FRONT
L;;;;;REV.

[<]/[>]:Select

[SELECT]:Return
RESULT:WIRING
01EN_00_RXV750_GB.book Page 29 Friday, March 5, 2004 11:40 AM