Filter
Top Products
78
Editing timers
You can edit any timer you have set.
1. Open the timer group that contains the timer.
2. Switch to Edit mode via the Mode button.
3. Tap the timer you want to edit.
The contents of the timer appear.
4. Edit the timer.
5. Press the Left button to close the timer.
A confirmation screen appears, which allows you to save or
cancel the timer.
6. Tap Save.
The timer is edited.
Organizing macros and timers into groups
You can create as macro groups or timer groups up to 25 macros or
timers in each group.
1. Open any macro or timer group.
2. Switch to Add mode by using the Mode button.
You can create a new group, copy an existing group, or restore a
previous deleted group.
• Create a new group: You add a new group in which you can
record new macros.
• Copy an existing group: You copy a group and its macros and
use it for new macros.
• Restore a previously deleted group: You restore a deleted
group and reuse the macros.
3. Tap Create Timer Group or Create Macro Group.
Getting the Maximum out of it
Setting timers
To activate a device at the time you set.
1. Tap the Macro menu button.
2. Open the macro menu and select a timer group.
3. Switch to Edit mode by using the Mode button.
Empty timer buttons appear in the timer control panel.
4. Tap the button you want to set a timer for.
The first timer control panel appears in which you can set the
start time.
5. Enter the command the timer has to execute.
A timer can contain either a single IR command or a macro.
You can navigate to any control panel you want, just as you can
in Use mode.
6. Tap the clock button and set the start time using the
Left/Right buttons.
7. Tap one or more day buttons to select or deselect
days for the timer.
You can choose to repeat the timer weekly.
8. Scroll down to display the second timer control panel
in which you can set the stop time.
9. Enter the command the timer has to execute.
10.Tap the clock button and set the stop time using the
Left/Right buttons.
11.Press the Left button to close the timer.
A confirmation screen appears, which allows you to save or
cancel the timer.
12.Tap Save.
The timer is activated.
Note:
The timer only works when the remote controller’s sending eye is
pointed towards the controlled device and no obstructions interfere
the infrared signal.