Integra DTA-70.1 Stereo Amplifier User Manual


 
4
Thank you for purchasing an Integra 9-Channel Ampli-
fier. Please read this manual thoroughly before making
connections and plugging in the unit.
Following the instructions in this manual will enable you
to obtain optimum performance and listening enjoyment
from your new 9-Channel Amplifier.
Please retain this manual for future reference.
Features
150 Watts per channel, minimum RMS into
8 ohms, 2 channels driven, from 20 to
20,000 Hz with no more than 0.05 % total
harmonic distortion
THX™ Ultra2™ certified
*1
WRAT–Wide Range Amplifier Technology
(5 Hz-100 kHz bandwidth)
Push-Pull amplification design with three-
stage inverted Darlington circuitry
Massive toroidal transformer
Customized 22,000 µF large capacitors for
effective power supply
Audio-tuned reference capacitors for each
channel
Low-impedance, copper bus plates for
perfect ground potential
Gold-plated, XLR and machined, solid brass
RCA input terminals
Custom-designed large power transistors to
drive high currents
High-current, low-impedance circuit board
by using thick copper foil (70 µ)
Gold-plated, color-coded, transparent
speaker posts
Auto power-down function
Multi-zone capability (up to Zone 3)
*2
Bi-amping capability
*2
12V trigger in
Aluminum front panel
Detachable power cord
*1
THX and Ultra2 are trademarks of THX Ltd. THX may be
registered in some jurisdictions. All rights reserved.
*2 Depends on AV controller
DTA-70.1_En_100108.book Page 4 Friday, January 8, 2010 2:04 PM