Filter
Top Products
22
Insignia NS-R5101 5.1 Surround Sound A/V Receiver
www.insignia-products.com
To adjust the sound parameters:
1 Press the SOUND PARAMETER button.
2 Press the select or buttons to select the
parameter.
3 Press the select or buttons to adjust the
parameter.
4 Repeat the above procedure to adjust the
other parameters.
Adjusting each channel level with test tone
The volume level of each channel can be
adjusted easily with the test tone function.
To adjust each channel level:
1 Press the TEST button.
The test tone mode is displayed and is heard
from each channel’s speaker for two seconds
as follows:
• FL—Front Left
• C—Center
• FR—Front Right
• SR—Surround Right
• SL—Surround Left
• SW—Subwoofer
2 At each channel, press the select or
buttons to adjust the level as desired until the
sound level of each speaker sounds equally
loud.
3 Press TEST to cancel the test tone function.
Using the remote control
Using the buttons
Note
When the SPEAKER button is set to off, the test
tone function does not work.
Note
When the speaker setting is “N (NONE)”, the test
tone of the corresponding channel is not available.
Item Description For more information, see...
1 STANDBY button “Using your receiver” on page 24.
2 SLEEP button “Using the sleep timer” on
page 29.
3 DIMMER button “Adjusting the display brightness”
on page 29.
4
VOLUME /
buttons
“Using your receiver” on page 24.
5 MUTE button “Using your receiver” on page 24.
6 CHANNEL LEVEL
button
“Adjusting the current channel
level” on page 20.
7 SETUP button “Navigating through the setup
menu” on page 17.
8 MEMORY/ENTER
button
“Memorizing the adjusted channel
levels” on page 21.
9
SELECT button
“Navigating through the setup
menu” on page 17.
10 Surround mode </>
buttons
“Enjoying surround sound” on
page 26.