Filter
Top Products
6
Insignia NS-R2000 Stereo Receiver
www.insignia-products.com
Connecting a turntable
Connecting speakers
To connect your speakers:
• Connect your speaker cables to the receiver.
Be sure to connect the speakers firmly and
correctly according to the channel (left and
right) and the polarity (+ and -). If you do not
make the connections correctly, you will not
hear any sounds from the speakers.
If the sound is unnatural and lacks bass, the
speaker polarity is incorrect.
Connecting headphones
To connect your headphones:
• Insert the headphone plug into the
headphone jack on the receiver.
Connecting the power
To connect your receiver to power:
• Plug the power cord into an AC outlet.
Installing batteries
To install the batteries:
1 Remove the cover.
3 MD recorder or other device.
Note
To connect a turntable with an MC type cartridge,
use a separate head amplifier or step-up
transformer.
Item Description
1 Speaker A.
2 Speaker jacks.
3 Speaker B.
Caution
Use speakers with an impedance of 8 Ω or more if
using only the SPEAKER A or SPEAKER B
terminals. Use speakers with an impedance of
16 Ω or more if using both the SPEAKER A or
SPEAKER B terminals.
Caution
Do not let the bare speaker wires touch each other
or any metal part of this receiver. Doing so may
damage the receiver or speaker.
Item Description
1
3
2
Notes
• If you have only one pair of speakers, connect
them to the SPEAKER A terminals.
• Connect a second pair of speakers to the
SPEAKER B terminals.
Notes
To hear sound from the headphones, make sure
the SPEAKER A and SPEAKER B buttons are
set to off.
Caution
Do not use Ni-Cd rechargeable batteries in this
remote control.