Filter
Top Products
25
I
ns
i
gn
i
a
NS
-
HD2114
DVD
Sh
e
lf
S
ystem
www.insignia-products.com
To set the sleep timer:
1 Press the CLOCK button on the remote control repeatedly to
select S----.
2 Enter the sleep timer interval by pressing the number buttons. For
example, if you want the player to turn off after 45 minutes, press
0,4,5. The player will turn off automatically after 45 minutes.
To set the player to turn on automatically:
1 Press the CLOCK button on the remote control repeatedly to
select O--:--.
2 Enter the turn-on time by pressing the number buttons. For
example, if you want the player to turn on at 5:00PM, press the
CLOCK button to change the display to PM, then press 0,5,0,0.
The player saves the setting automatically.
Troubleshooting
Caution
Do not try to repair the shelf system yourself. Doing so will
invalidate your warranty.
Problem Possible cause Solution
No power. AC plug not fully inserted in the
power outlet.
Make sure the AC plug is fully
inserted in the power outlet.
The remote
control does not
work.
Low batteries. Replace the batteries with new
ones.
The remote controller is not
aimed at the shelf system.
Aim the remote control at the shelf
system.
No picture. Bad connections. Reconnect the system using the
illustrations at the beginning of this
User Guide.
Power cord not securely
connected.
Connect the power cord.
TV not set to video mode Set the TV to video mode.
The scan setting of the shelf
system does not match the TV.
Reset the scanning mode.
The disc does
not play.
The disc was incorrectly
inserted.
Reinsert the disc with the label side
up.
The disc is defective. Try another disc.
The disc tray is not closed. Close the disc tray.
There is condensation in the
disc compartment.
Remove the disc and leave the
cover open for about an hour in a
dry environment.