Filter
Top Products
14
I
ns
i
gn
i
a
NS
-
HD2114
DVD
Sh
e
lf
S
ystem
www.insignia-products.com
Connecting the power cord
To prepare your shelf system for use:
1 Make sure that your local AC power source matches the voltage
shown on the plate located inside the battery compartment. If it
does not, consult your dealer or service center.
2 Plug the power cord into an AC power outlet.
3 Press the POWER button to turn on your shelf system. Press the
POWER button again to turn off your shelf system.
To completely turn off the shelf system, unplug the power cord
from the AC power outlet.
Using your shelf system
Playing the radio
To play the radio:
1 Press the POWER button to turn on the shelf system.
2 Press the FUNCTION button on the front panel, or the FM/AM
button on the remote control, to select the radio.
3 Press the FUNCTION button or the FM/AM button again to select
the band you want to listen to. Press MO/ST to select mono or
stereo mode.
4 To toggle between Analog radio and HD radio, press the A/D
button. While in HD radio mode, press HD CHAN to switch to
different channels. Also while in HD radio mode, press DISPLAY
to display information about the current station, including channel
name, artist, title, program type, and service data.
5 Press TU+ or TU– to tune the radio up or down by steps.
6 To save the current frequency, press the SAVE button. To save
other frequencies, press the number buttons to go to a specific
preset number, then press the T/F button to input the frequency.
For example, to save 99.3 MHz to the 18th preset, press 1, then 8
to select the preset, then press the T/F button to input 993 and
press the SAVE button to save it.
7 To tune to a preset station, press the number buttons to go to a
specific preset, or press CH+ or CH– to go to the next or previous
preset station.
Caution
To protect your shelf system, unplug the power cord from
the AC power outlet during heavy thunderstorms.