Filter
Top Products
15
I
ns
i
gn
i
a
NS
-
HD2114
DVD
Sh
e
lf
S
ystem
www.insignia-products.com
8 To tune directly to a specific frequency, press T/F, then input the
frequency with the number buttons.
9 Press SEARCH to automatically search for stations in the
selected band, from the lowest frequency to the highest. The radio
saves up to 60 of the stations found. Press SEARCH again to stop
searching.
10 Press SEEK UP or SEEK DOWN to tune to the next higher
or lower active frequency.
11 Adjust the antenna.
• For FM listening, pull out the antenna and adjust it for the best
signal.
• For AM listening, rotate the player for the best signal (it has a
built-in antenna).
12 Adjust the sound level with the VOLUME control.
13 To turn the radio off, press the POWER button.
When the shelf system is turned off, it automatically remembers
the last station.
Playing a CD
The player can play audio discs, including CDs and CD-Rs.
To play a CD:
1 Press the POWER button to turn on the shelf system.
2 Press the OPEN/CLOSE button on the remote control, or the
EJECT button on the player, to open the disc tray.
3 Place a disc, with the label side up, on the tray, then press the
OPEN/CLOSE button on the remote control, or the EJECT
button on the player to close the disc tray. The disc begins playing
automatically.
4 Press the PLAY/PAUSE button to start pause playback. To
resume playback, press the PLAY/PAUSE button again.
5 Adjust the sound level with the VOLUME control knob (on the
player) or with the VOL+/VOL- buttons on the remote control.
6 Press the STOP button to stop the CD playback.
Note
The Stereo indicator will appear when a stereo station is
tuned in and the signal is strong enough. (For AM, stereo is
only available in HD radio mode.
Note
CD-Rs must be finalized to play in this CD player.