Filter
Top Products
6
NS-B1110 CD Boombox
www.insignia-products.com
To play a CD:
1 Slide the FUNCTION switch to CD.
2 Lift the CD door at the edge marked OPEN/CLOSE.
3 Remove the paper card protector.
4 Place a CD, CD-R, or CD-RW into the CD compartment with the
label side up, then gently close the door.
5 If the CD does not start to play automatically, press the
PLAY/PAUSE button to start playback.
Searching for a track or file
To search for a track or file:
• During CD playback
• Press the button once to go to the next track or file on
the CD.
• Press the button one or more times until the track or file
number you want appears in the display.
• Press and hold the button to fast-forward to a section on
the CD.
• Press the button once to go to the beginning of the
current track.
• Press the button two or more times to go to a previous
track or file on the CD.
• Press and hold the button to fast-reverse to a section on
the CD.
Randomly playing tracks or files
To play tracks or files randomly:
1 If the CD is playing, press the button to stop playback.
2 Press the RANDOM button once.
3 Press the PLAY/PAUSE button to start random playback. Your
CD boombox plays the tracks or files in random order.
4 To cancel random playback, press the button twice.
Repeating a track, file, or entire CD
To repeat a track, file, or entire CD:
1 During playback, press the REPEAT button one or more times to
select the repeat mode. You can select:
• REPEAT–Repeats the current track. In this mode, the repeat
indicator (the LED near the REPEAT button) flashes.
• REPEAT ALL–Repeats the entire CD. In this mode, the repeat
indicator turns on, but does not flash.
2 To cancel repeat playback, press the button twice.
>II
>II
NS-B1110.fm Page 6 Friday, February 24, 2006 12:10 AM