Filter
Top Products
24
Optimizing video images
After your video device is connected properly and the image is on the screen, you
can optimize the image using the onscreen menus. For general information on using
the menus, see page 25.
• Adjust the Keystone, Contrast, Brightness, Color, or Tint (page 26).
• Change the Aspect Ratio. Choose the option that best fits your input source
(page 26).
• Select a Sharpness setting (page 26).
• Adjust the Color Temperature. Select a listed warmth value (page 27).
• Turn on Overscan to remove noise on the edges of the image (page 27).
NOTE:
Color, Tint, and Sharpness are not available on the IN118HDxc or
IN119HDxc.
Customizing the projector
You can customize the projector for your specific setup and needs. See page 28 for
details on these features.
• For rear projection, turn Rear Project on in the
Advanced Menu > Setup >
Image Setup... menu.
• For ceiling mounted projection, turn
Ceiling Mount on in the Basic menu.
• Specify which source the projector checks first fo
r active video during power-
up.
• Specify the function of the Custom key on the remote.
• Turn the projector’s display messages on and off.
• Turn on power saving features.
• Specify appearance of blank scr
een and startup screen.
• Specify the language viewed on the menus.
• Save settings for the active
source as a preset.