Filter
Top Products
OPERATIONAL INSTRUCTIONS
1. To preview the alarm time, press the ALARM 1 or ALARM 2 buttons once.
2. To deactivate the alarm, press the ALARM 1 or ALARM 2 buttons once more.
3. To activate the alarm, press the ALARM 1 or ALARM 2 buttons again.
4. To snooze, press the SNOOZE / DIMMER button on the i177 (or on Remote Control), following
the sounding of the alarm. The alarm will then shut o and will sound again in approximately
9 minutes. You will have the opportunity to repeat this cycle many times during a 1 hour allotted
alarm cycle.
5. To turn the alarm o, press the POWER OFF button on the i177 (or the POWER ON/OFF button
on the Remote Control). If all settings remain the same, the alarm will turn on the following
day at the same time. When the alarm is not turned o after it sounds, it will then play for
approximately 60 minutes and turn o automatically. This cycle will repeat every 24 hours unless
the settings are changed.
6. To prevent the alarm from coming on daily, press the ALARM 1 or ALARM 2 buttons and set to
o. Both the Alarm Icon and Wake-to icon will disappear to signal that the alarm is deactivated.
Note:
· Set your iPod to the repeat mode if you’ve selected Wake To iPod, and your iPod has less than one hour of songs.
· If you have selected the Wake To iPod setting, yet no iPod is present or there is no music on the iPod at the alarm
time, the i177 will automatically switch to the buzzer mode. If only an iPod shue is docked, the Wake to iPod
setting will likewise switch to the buzzer mode.
· In order to wake to your iPod, it must be appropriately placed in the built-in universal dock and powered o.
· In the event of a power outage or if AC power is disconnected, when the i177 is powered by the Backup Battery,
time and date will not be displayed, however time and date settings will be temporarily saved, but the alarm will
not sound.
Using the Alarm Function
To adjust the brightness of the LCD screen, press the SNOOZE / DIMMER button during normal
operation. Each press will change the brightness level of the LCD screen.
Adjusting the Brightness of LCD Screen
OPERATIONAL INSTRUCTIONS
12 | iLuv
1. To enter into the sleep mode, press the SLEEP button while the i177 is o or while listening to
your iPod or the radio. The unit will automatically turn o after the selected time. The sleep
mode also has a feature called the “Gentle Sleep”, which gradually decreases the volume.
2. To adjust the sleep time, press the SLEEP button again and choose from 15 to 120 minutes.
Pressing the SLEEP button while the sleep function is set to 15 minutes will turn the unit o.
3. To view the sleep time, wait until the display returns to the current time and press the SLEEP
button once. It will display the sleep time remaining. Press again to change the sleep time to the
next lowest increment.
4. To stop listening at any time, press the POWER OFF button or the POWER ON/OFF button on
the Remote Control.
Note: The i177 has the independent volume settings for the sleep mode with no eect on the alarm volume. The
sleep volume will remain at the same level until the setting is changed.
Setting the Sleep Time
iLuv | 13i177 | V14M14_IM_EN_09242008