Filter
Top Products
14
Setting the sound characteristics
Press shortly and repeatedly the SEL button to select the audio setting: BASS =>
TREBLE => BALANCE => FADER => DSP.
Press ▲/▼ buttons on the panel or on the RC to select the setting.
Press ◄/► buttons to adjust the setting.
Press SEL again to confirm and return to current mode.
Notes: If turning off the power all the settings of each mode will be saved.
• If turning off the ACC power all the settings will become as they were set on the plant as current.
• If you don’t adjust setting within 3 seconds after selecting the desired setting, the unit will automatically
return to the current mode.
Setting other characteristics
• During FM or DVD mode press and hold for 2 seconds the MENU button to enter
the setting mode.
• In Radio mode shortly and repeatedly press the OK button to select the setting:
AUDIO => DUAL => RDS SETUP => EXPERT => TILT (pic.1).
In DVD mode shortly and repeatedly press the OK button to select the setting:
AUDIO => COLOR => PICTURE => SCREEN => DUAL => RDS SETUP =>
EXPERT => TILT (pic. 2).
• Press ▲/▼ buttons on the panel or on the RC to select the setting.
• Press ◄/► buttons to adjust the setting.
• Press OK again to confirm, press MENU to return to settings list.
AUDIO
1. BASS
2. TREBLE
3. BALANCE
4. FADER
5. DSP
MENU
1. AUDIO 5. DUAL
2. COLOR 6. RDS SETUP
3. PICTURE 7. EXPERT
4. SCREEN 8. TILT
Pic. 2
MENU
1. AUDIO
2. DUAL
3. RDS SETUP
4. EXPERT
5. TILT
Pic. 1