Filter
Top Products
13
General operation
Reset the unit
Operating the unit for the first time or after replacing the car battery, you must reset the unit.
Press the button and then press RESET button under the panel to restore the unit to the original factory
settings.
Power button
Press any button to turn on the unit.
Long press POWER button to turn off the unit.
Monitor tilt angle
Press the TILT button to enter the monitor tilt angle adjustment mode.
Press the / buttons to select the position: 0 => 1 => 2 => 3 => 4 => 5 =>6.
The monitor will flip down accordingly.
Volume control
Press VOL + button to increase the volume level.
Press VOL – button to decrease the volume level.
Turning the sound off
When the power is on press the POWER/MUTE button on the panel or MUTE button on the RC to turn the sound
off. Press it again to turn the sound on.