Filter
Top Products
To remove the input assemblies
1Remove top cover, see “To remove the top cover.” Remove the front panel, see steps 1 and 2
in “To remove the front panel.” Note that the following steps are showing illustrations of an
HP E1433A with a standard configuration (two input assemblies). If your HP E1433A has option
1DL (one input assembly) , the following steps will be the same except the length of the screws
and the number of input assemblies to be removed.
2Using a T-10 torx driver, remove the four screws that attach the assemblies to the bottom cover.
HP E1433A User's Guide
Replacing Assemblies
10-18