Filter
Top Products
21
ENGLISH
APPENDIX
Surround Mode Description Incoming Bitstream or Signal
DTS Neo:6
Cinema
Depending on the number of speakers in your system, select 3-, 5- or
6-channel modes, enhanced for movie or video presentations.
DTS 2/2/.0 or .1, 3/2/.0 or .1 •
DTS 96/24 •
Analog (2-channel) •
PCM (32kHz, 44.1kHz or 48kHz) •
DTS Neo:6
Music
Available only in 5- and 6-channel modes, creates a surround
presentation suitable for music recordings.
DTS 2/2/.0 or .1, 3/2/.0 or .1 •
DTS 96/24 •
Analog (2-channel) •
PCM (32kHz, 44.1kHz or 48kHz) •
Logic 7
Mode Group
A Harman International proprietary technology, Logic 7 technology
enhances 2-channel and matrix-encoded recordings by deriving
separate information for the surround back channels. This provides more
accurate placement of sound, improves panning and expands the sound
field, even when used with 5.1-channel systems. Logic 7 technology
uses 96kHz processing, and is available in 5.1-or 7.1-channel modes.
Three variants are available.
See below
Logic 7
Movie
Especially suited to 2-channel sources containing Dolby Surround
or matrix encoding, Logic 7 Movie mode increases center channel
intelligibility.
Analog (2-channel) •
Tuner •
PCM (32kHz, 44.1kHz, 48kHz, 96kHz) •
Logic 7
Music
The AVR 460/AVR 360 is programmed at the factory to default to
this mode for 2-channel signals. Logic 7 Music mode is well suited to
conventional 2-channel music recordings.
Analog (2-channel) •
Tuner •
PCM (32kHz, 44.1kHz, 48kHz, 96kHz) •
Logic 7
Game
Use Logic 7 Game mode to enhance enjoyment of video game consoles. Analog (2-channel) •
Tuner •
PCM (32kHz, 44.1kHz, 48kHz, 96kHz) •
5-Channel Stereo Useful for parties, the left- and right-channel information is played
through both the front and surround speakers on each side, while the
center speaker plays a summed mono mix.
Analog (2-channel) •
Tuner •
PCM (32kHz, 44.1kHz, 48kHz, 96kHz, 192kHz) •
7-Channel Stereo Expands the 5-Channel Stereo presentation to include the surround
back channels.
Analog (2-channel) •
Tuner •
PCM (32kHz, 44.1kHz, 48kHz, 96kHz, 192kHz) •
2-Channel Stereo Turns off all surround processing and plays a pure 2-channel signal
or a downmix of a multichannel signal. The signal is digitized and
bass management settings are applied, making it appropriate when a
subwoofer is used.
Analog (2-channel; DSP downmix available for •
multichannel)
Tuner •
PCM (32kHz, 44.1kHz, 48kHz, 96kHz) •
2-Channel Stereo
(Analog Bypass)
Maintains an analog input signal in that form, bypassing all digital
processing (i.e., surround and bass management). Requires Tone Control
setting to be off.
Analog (2-channel) •
Tuner •
Table A12 – continued