Filter
Top Products
Form No. S3423-1112
Supersedes S3423-912
Page 6 of 28
Refrigerant Connections (Self-Sealing Fittings)
Horizontal Drain Pan Kit
Remote Condenser Cover
Side Filter Rack – For Upflow Installations
Optional Field Installed Start Kits for 1-Phase Models 1
Optional Field Installed Start Kit for 1-Phase Models 2
rebmuNtraPnoitpircseD.D.OeziSeniL
1-4KS-SLTGsdnEriaPowThtiwtiKbutSteSeniL 1 "8/7&"8/3
1-2KS-SLTGsdnEriaPelgniShtiwtiKbutSteSeniL 1 "8/7&"8/3
1-30-SLTGsgnittiFhtiwteSeniL'3"8/7&"8/3
1-51-SLTGsgnittiFhtiwteSeniL'51"8/7&"8/3
1-52-SLTGsgnittiFhtiwteSeniL'52"8/7&"8/3
1-53-SLTGsgnittiFhtiwteSeniL'53"8/7&"8/3
1-05-SLTGsgnittiFhtiwteSeniL'05"8/7&"8/3
1ZHTG
snoitceS"lioC-A"ATGroftiKnaPniarDlatnoziroH
DILTG
metsyS-tilpSsadellatsnInehwsnoitceSgnisnednoCCTGrofrevoCpoT
sledoMtinU rebmuNtraPdellatsnIdleiF
A-1S63CTG 411KS
A-1S84CTG 111KS
A-1S06CTG 511KS
sledoMtinU rebmuNtraPdellatsnIdleiF
esahP-1llA 51-CMC
1 One pair consists of one each of 3/8" liquid and 7/8"
vapor self-sealing fittings with short section of tube with
90° bend and each has 1/4" service port.
32RF
retliF2VREMhtiw1x52x61kcaRretliF
)MPF056yticolevmumixam,elbahsawhsemmunimulA(
1 Start capacitor and potential relay start kit can be used with all -A single phase models only. Increases starting torque 9x.
Do not use if CMC-15 is used.
2 PTCR start kit can be used with all -A single phase models. Increases starting torque 2-3x.
Do not use if SK111, SK114 or SK115 is used.
GTLS-SK2-1 (Shown)
Coil Spacers for GTADP Fossil Fuel Coils
0222PDASC
sledoM011,001,580,570RLF/FLFsecanruFliOdraBstiF
0252PDASC
sledoM041,031RLFsecanruFliOdraBstiF