Filter
Top Products
24
CLOCK AND TIMER FUNCTIONS, cont'd.
3) Example for Setting Events on Two Different Memory
Channels:
PROGRAMMING MEMORY 08 in Timer '1' and
MEMORY 29 in Timer '2':
With frequency displayed,
Press 'MEMO' followed within two seconds by button
sequence:
Press followed within 2 seconds by depression of
the
button until the '1' is displayed with 'MEMORY 08'.
After 3 seconds, the display reverts to the frequency readout.
With frequency displayed, press
followed within 2
seconds by button sequence .
Press followed within 2 seconds by depression(s)
of the
button until the '2' is displayed with 'MEMORY 29'
indicated.
After 3 seconds, the display reverts to the frequency readout.
To set an event with no memory channel to be recalled, exit the
memory mode before enabling the event. In this case, the
SATELLIT 800 MILLENNIUM receiver maintains its current
settings. Refer to 'ENABLING/ DISABLING TIMER OPERATION'
to enable or disable either of the two timers.