Grundig 800 MILLENNIUM Stereo Receiver User Manual


 
23
CLOCK AND TIMER FUNCTIONS, cont'd.
Press
Press 'CLR/LOCK' (enters no OFF Time for timer '1')
Timers '1' and '2' Enabled
Timer '1' Enabled: Timer '2' Disabled
If either one or both the timer '1' or timer '2' are enabled, the
TIMER symbol will continue to be displayed after the receiver
is turned off. Be certain to leave the volume setting at the
desired level. The receiver will automatically turn on and off
as programmed. If both timers are disabled ('-' '-' is
displayed), the timer programming in either or both timers is
retained, but no TIMER action will take place until one or
both are enabled.
Press
Press the button sequence .
FM
2)Example for Setting Overlapping Events:
With frequency displayed, suppose it is desired to record a
one hour program on one frequency with a beginning time of
'16:59' and an ending time of '18:00', and a second program
on the same frequency with a beginning time of '18:00' and
an ending time of '19:01'.
Press
Action:
Press and hold the
button for 2 seconds.
Press the button sequence .
Press the button se
q
uence
Press for normal frequency display.