Filter
Top Products
EN-2 GTM 11 Owner’s Manual
E
N
CONNECTING THE GTM 11
What’s Included
• GTM 11 with LED and mini-USB plug
• Whip antenna (stiff antenna) • Wire antenna (flexible wire antenna)
• Hook-and-loop fasteners • Double-sided tape
Step 1: Snap the antenna on the GTM 11
You can use either the whip or wire antenna for your GTM 11. Use the
traditional whip antenna for most installations. If you want to completely
hide your GTM 11, use the wire antenna. Also, use the wire antenna if the
whip antenna does not get an adequate signal strength.
1. Align the tab on the antenna with the front of the GTM 11.
Antenna
GTM 11
LED
Tab
2. Snap the antenna onto the connector on the GTM 11. The antenna
clicks indicating it is locked in place. You might have to wiggle it a
bit to properly get it to click.
To remove the antenna from the GTM 11, press the antenna connector’s tab.
Pull the antenna off the GTM 11.
Step 2: Connect the GTM 11 to your GPS
device
Connect the mini-USB plug on the GTM 11 cable into the mini-USB
connector on your Garmin GPS device.
mini-USB
plug
Step 3: Connect your Garmin GPS to external
power
Connect your GPS device to external power. Turn the GPS device on, if it
does not turn on automatically.
NOTE: When using the GTM 11, your Garmin GPS device must
be connected to external power.