Filter
Top Products
If the password is not correct an error is displayed:
After a few seconds the display will show the parameters again.
•
When the password is correct, the display will show:
To change the password press the SETTING key.
To change the frequency press the PROGRAM key.
•
For changing the password proceed with the same method for the
required password:
The confirmation password will be required.
CONFIRM (Y/N) ?
N=SEL. Y=SET.
PROGRAM
SETTING
NEW PASS . = SET.
NEW FREQ . = PRG
PROGRAM
SETTING
ERROR
PASSWORD
PROGRAM
SETTING
NEW PASSWORD
0
1 2 3 4 5 6 7 8 9
PROGRAM
SETTING
CONFIRMATION
0
1 2 3 4 5 6 7 8 9
PROGRAM
SETTING