Filter
Top Products
190-01553-01 Rev. B
Garmin GTR 200 Pilot’s Guide
14
GTR 200
APPENDIX
SOFTKEY CONFIGURATION
The GTR 200 features two User-defined softkeys. Softkeys are defined
in Configuration Mode, see below for configuring softkeys. Softkeys can
be disabled or assigned to one of the following:
• PILOT PTT ( ) - Pilot Push-to-Talk can be used in place of or as
a back up to a remote Push-to-Talk switch.
• MUSIC ON/OFF ( ) - Turns music input ON/OFF. N/A when
Intercom is configured off. Press and hold to toggle COM Mute
Music.
• USER LIST ( ) - Provides quick access to the COM User
Frequencies.
• PILOT ISOLATION ( ) - Isolates the Pilot from ICS
Communication. N/A when Intercom is configured off.
• TUNE EMERGENCY ( ) - Quickly tunes and activates the
emergency frequency (121.500 MHz).
Configuring Softkeys:
1) Press and hold the SMALL Knob while applying power to the unit ,
by either turning the Power/Volume/Squelch knob clockwise or, if
installed, turning on the avionics master switch.
2) Turn the LARGE Knob to highlight SOFTKEY SETUP and press the
SMALL Knob to select.
3) Turn the LARGE Knob to toggle between the Key 1 or Key 2 field.
4) Turn the SMALL Knob to highlight one of the following function:
(PILOT PTT, PILOT ISOLATION, MUSIC ON/OFF, USER LIST, or TUNE
EMERGENCY).
NOTE: Both softkeys cannot select the same function (except Disabled).
5) Press the BACK Softkey to exit the Softkey Setup menu.
6) Power off the unit and back on to save the softkey settings.