Filter
Top Products
190-01553-01 Rev. B
Garmin GTR 200 Pilot’s Guide
10
GTR 200
• ICS MUTE ♫ (ON/OFF) - When ON, music will be muted when the
intercom is active. Only available when ICS is configured.
• COM 3D AUDIO (ON/OFF) - When ON, 3D audio is enabled for
received transmissions when Standby COM Channel monitoring is active.
Only available when ICS is configured.
• ICS 3D AUDIO (ON/OFF) - When ON, 3D audio is enabled for ICS
Communication. Only available when ICS is configured.
• KEY BEEPS (OFF/0-100%/COM) - Key Beep volume can be configured
OFF, as volume value (0-100%), or slaved to COM volume.
• CONTRAST (-10 to +10) - Adjusts the display contrast level.
Accessing/Using the SETUP Menu:
1) Press the MENU key.
2) Turn the LARGE Knob to highlight SETUP and press the SMALL Knob.
3) Turn the LARGE Knob to navigate. Turn or Press the SMALL Knob to
change a selection.
4) Press the BACK Softkey to return to the Main Menu.
3D AUDIO
3D Audio is useful when multiple audio sources are present. By using
different responses in each ear, 3D audio processing creates the illusion
that each audio source is coming from a unique location or seat position.
Because this feature uses different signals for left and right channels,
it requires wiring for stereo intercom and stereo headsets. If 3D audio
is activated when mono headsets are in use, the listener will still hear all
audio sources; however, there is no benefit from location separation.
During normal operation and with 3D Audio enabled, the listener hears
the Active Frequency at the 12 o’clock position. If the Standby is selected
for monitoring, the listener hears the Active at 11 o’clock and the Standby
at the 1 o’clock position. Intercom positions are processed to sound like