Furman Sound MS2A-1 Stereo Amplifier User Manual


 
12
Speakers
Specifications subject to change without notice
Type: 2 each, 1.5" x 2.75" full range, acoustically tuned with chassis damping.
Each channel driven by 20 Watt amplifier.
Output: 87 ±6 dB SPL at 1 meter, 150 Hz to 16 kHz
Magnetically shielded
Front Panel: Volume
Balance (non-video units only)
VU/PPM Select
Speaker Mute
+4/+8 dBu Reference Level Select
Meter Dimmer
Analog/Digital Source Select (digital units only)
Left Channel Select, Right Channel Select (four input models only)
Video Monitor: Brightness, Contrast, Color, Tint
(if present)
Rear Panel: Gain Trim (±6 dB, analog outputs only)
Front Panel: 2 (or 4) each, 14 segment LED meters: -40 dB to +3 dB labels; 0 dB indication is
equivalent to +4 dBu or +8 dBu depending on Ref Level setting. Internal trim control
allows user adjustment. PEAK indicator lights 1 dB above highest display segment,
and is internally adjustable.
VU/PPM indicator
Channel to Channel Phase
Analog/Digital input selection
Speaker Mute
Signal Present (for digital inputs only)
Rear Panel: Signal Present for each analog and digital audio input. Sensitivity: -20 dBu
Type: External with IEC-320 connector, 4’ (1.2 m) captive cord to DIN 5 connector;
separate 8’ (2.4 m) AC Mains line cord supplied with connector appropriate for
country of use
Operating: Universal 100-240 VAC, 50/60 Hz, 45 W
Agency Approvals: UL/CSA/CE listed
Output: +5 VDC at 3 Amps; +12 VDC at 2 Amps; -12 VDC at .3 Amps
Dimensions: MS Series unit:19" W x 13" D x 1.75" H; Power Supply: 6.5” W x 3” D x 2.2” H
Weight: 9 lbs (4.1 kg)
Controls
Indicators
Power
Mechanical