Furman Sound MS2A-1 Stereo Amplifier User Manual


 
11
Inputs
Outputs
Analog audio: 2 (or 4) each female balanced XLR
CMRR: >90 dB, 20 Hz to 20 kHz
Differential Input Impedance: 24 k
Maximum Input Level: +25 dBu
Signal present indicator: -20 dBu sensitivity
Digital audio: 1 (or 2) each BNC, AES/EBU
(if present) Resolution: 24 bit
Sampling Frequency: 16 kHz to 96 kHz
Oversampling: 8X
Internal Clock: 256 x Sampling Frequency
THD+N: -83 dB
Dynamic Range: 95 dB
Signal to Noise Ratio: 97 dB
Channel Separation: 95 dB
Internal Analog Filter: -3 dB at 32 kHz
Video: 1 each BNC Video, auto sense NTSC/PAL
(if present) Input level: 1.0 V
p-p
composite video
(to EIA RS-170A and PAL Standards)
Analog audio: 2 each male balanced XLR
Maximum Output Level: +25 dBu into 1 k
Gain Trim: ±6 dB (dual ganged stereo control)
Signal Present indicator: -20 dBu sensitivity
Differential Output Impedance: 50 with load capacitance of
up to 1 µF
Frequency Response: 20 Hz to 200 kHz
THD+N: .002%
Headphone: Power: 270 mW into 56 , both channels
driven
THD+N: .003%
Display type: TFT, LCD
Screen Size (diagonal): 1.8 inch
Active Display Area: 48.6 mm W x 39.6 mm H
Number of pixels: 280 W x 220 H
Dot Pitch: 0.127 mm W x 0.121 mm H
Brightness: 140 cd/m
2
typical (140 cd/m
2
min.)
Contrast Ratio: 100 typical (60 minimum) at
optimized viewing angle
Viewing Angle: Left/Right: ±45° H (at CR>10)
Top/Bottom: ±10°/30° V (at CR>10)
Video (if present)
MS Series Specifications