Fujitsu TD725SW Speaker User Manual


 
-
20
-
Before turning the power on, and before switching inputs, always set the volume to minimum.
A sudden large output could damage the connected speaker system.
Depending on the location, your enjoyment of music could annoy other people. Please set the volume
to a suitable level so as not to disturb the neighbors.
At nighttime particularly, even a low volume of sound will travel.
Please respect each other’s concerns so as to maintain a comfortable living environment.
Make sure that the power to all devices is off before connecting the subwoofer.
If the subwoofer becomes soiled, wipe it lightly with a soft cloth moistened with a neutral detergent.
Do not use thinners or benzene.
Fitting the feet
Placing the unit
When the subwoofer is installed directly
on flooring or a similar surface, fit the
feet to the bottom of the subwoofer.
The subwoofer has a photoreceptor for the remote
control on the indicator panel and the indicator panel
on the unit must be oriented toward the audience.
If the subwoofer is oriented parallel to the walls of the
room, sound reflected from the walls may cancel out
some of the sound it produces, so you are
recommended to orient the subwoofer at an angle to
the walls.
Subwoofer
Indicator panel
Foot x 4
CAUTION
Do not install the subwoofer at a location where the
remote control photoreceptor is exposed to direct
sunlight or any other strong light. This may cause
failure to respond to remote controller operations,
or erroneous operation.
Advice
Precautions on Use
Installing the Main Unit
To avoid damaging the speaker or
the floor, spread a soft cloth or
something similar on the floor and do
the work on this cloth.
ENGLISH