Filter
Top Products
Setting up the multi channel power amplifier
12
To wire to A500 Loudspeakers in
bridged mode
558 Multi Channel Power Amplifier
A500 LoudspeakerA500 Loudspeaker
ONON
InputInput
You can wire channels 1/2 and 4/5 in bridged output mode, to
obtain more than twice the power output.
● Switch the BRIDGED MODE switches to the ON position.
● Connect the audio inputs to the BALANCED or
UNBALANCED CHANNEL 1 and CHANNEL 5 inputs, as
appropriate.
● Connect the supplied bridged mode links between the black
(-) CHANNEL 1/2 and CHANNEL 4/5 terminals, as marked on
the back panel.
● Connect the loudspeakers between one pair of the red (+)
CHANNEL 1/2 and CHANNEL 4/5 terminals.
You can bi-wire in bridged mode by using the other pair of red
terminals to connect separately to the loudspeaker treble unit.