Extron electronic SMD 101 Stereo Receiver User Manual


  Open as PDF
of 8
 
3
Front Panel Features
SMD 101
IR
CONFIG
1
3
2 4
5
Figure 4. SMD101 Front Panel
a Power LED – Lights solid green when the SMD101 is powered. Lights solid red when in standby (low power) mode.
b Playback status indicator — Dual-color LED indicates the current state of playback operation:
• Solid Green – The SMD101 is actively decoding a stream.
• Blinking Green – A stream is selected for decoding, but playback is paused.
• Off – The selected stream is not being decoded.
• Solid Red – Playback errors.
c Network status indicator — Dual-color LED indicates the current state of network operation and connection quality.
• Solid Green – Indicates network conditions are favorable for the current source. The LED is also lit if the current source
is a local le.
• Red/Green – When ashing red and green, indicates encoder or network conditions are compromising image or audio
quality, and the buffers could be depleted.
• Solid Red – Indicates server or network conditions are compromising video or audio quality and the buffers could be
depleted.
• Off – No network connectivity.
d IR Receiver Window— Allows remote operation using a compatible IR hand control (optional).
e Config port — Connect a control PC or other USB device to this port with a mini-type B USB cable (not supplied). Use this
port to send Simple Instruction Set (SIS™) commands to the SMD101 for device conguration and control.
SMD101 Configuration
The SMD101 can be congured and controlled using a web-browser. To congure the SMD101 to play a multimedia stream:
1. Connect the external power supply to a 100 to 240 VAC, 50 or 60 Hz power source. The SMD101 powers up and undergoes
a self testing sequence.
2. Power up all connected devices. The SMD101 reads the EDID of the connected display device and sets the output
resolution and format.
3. The SMD101 can be connected to a control PC using the front panel USB port, the rear panel RS-232 connection, or the
RJ-45 LAN port (see Control System Connections on page2). Ensure the control PC is on the same subnet, power the
PC, and open a web browser.
• Google Chrome™ version 27 or higher (recommended),
• Mozilla
®
Firefox
®
(version 15 or higher) or
• Microsoft
®
InternetExplorer
®
version 8 or higher (for Windows operating systems).
4. Enter the default IP address of the SMD101 (192.168.254.254) into the browser address bar and press <Enter> on the
keyboard.
The Player Page opens with the browser, lists, and playlist editor panels open. The browser Streams tab is selected (see
gure 5 on page 4).
5. Congure the SMD101 using the Conguration, and Advanced Conguration pages. See the SMD101 User Guide at
www.extron.com for details.
 previous next