Filter
Top Products
The mounting plate can be installed vertically or horizontally.
Catch Tab
Vertical Mounting
Horizontal Mounting
Catch Tab
The mounting plate can be installed to a wall box (see “Mounting to a Wall Box” below) or to
a wall stud (see “Mounting to a Wall Stud” on the following page).
Mounting to a Wall Box
NOTE: Mounting hardware is not provided.
Wall opening
flush with
edge of box
Speaker
Cables
Cable Clamp
Screws or Nails
W
all Stud
1. Install the speaker cables into the wall or conduit before installing the wall box.
2. Place the wall box against the installation surface, and mark the guidelines for the
opening on the wall.
SM 3 User Guide • Installation 4