Filter
Top Products
Installation
The Installation section describes:
• Installing the Speaker Mounting Plate
• Attaching the Speaker to the Mounting Plate
• Removing the Speaker from the Mounting Plate
• Attaching a Secondary Support Cable
Installing the Speaker Mounting Plate
The SM 3 speaker comes with two types of speaker mounting plates:
• 0° plate — The 0° plate allows the speaker to be mounted flat on a vertical wall with
the speaker protruding less than four inches (ADA compliant) from the wall surface (see
the illustration below).
0° Mounting Plate
10° Mounting Plate
• 10° mounting plate — The 10° mounting plate allows the speaker to be installed at
a 10 degree angle so that the speaker can be pointed down from an elevated position
(see the illustration below).
0° Mounting Plate 10
° Mounting Plate
SM 3 User Guide • Installation 3