Filter
Top Products
A-2
Specifi cations, Part Numbers, and Accessories
MP 101 Series • Specifi cations, Part Numbers, and Accessories
Specifi cations
Audio
Gain ................................................ Adjustable, +25 dB to + 72 dB
Frequency response ..................... 20 Hz to 20 kHz, ±0.1 dB
THD + Noise (with a 10 Hz to 80 kHz bandwidth fi lter)
0.03% when input is -48 dBV and output
is +4 dBu.
0.14% when input is -60 dBV and output
is -10 dBV.
S/N ................................................. 92 dB at maximum output (unweighted,
with a 10 Hz to 80 kHz bandwidth fi lter)
CMRR .............................................. >70 dB @ 20 Hz to 20 kHz
Low cut fi lter .................................. 75 Hz (18 dB per octave)
Equivalent input noise ................. <126 dBV (unweighted, with a 10 Hz to
80 kHz bandwidth fi lter)
Audio input
Number/signal type .................... 1 mono, balanced
Connectors
MP 101 ................................ (1) 3.5 mm captive screw connector, 3 pole
MP 101 AAP, MP 101 D ....(1) female 3-pin XLR
Impedance ..................................... 2 k ohm balanced
Nominal level ................................ -60 dBV or -48 dBV
Maximum level ............................. -1.5 dBu, (balanced) at 1% THD+N
N 0 dBu = 0.775 Vrms, 0 dBV = 1 Vrms, 0 dBV 2 dBu
Audio output
Number/signal type .................... 1 mono, balanced
Connectors ..................................... (1) 3.5 mm captive screw connector, 3 pole
Impedance ..................................... <150 ohms balanced
Maximum level (Hi-Z) ................ >+25 dBu, balanced at 1% THD+N
Maximum level (600 ohm) .......... >+20 dBu, balanced at 1% THD+N
Control/remote — preamp
Contact closure .............................. (1) 3.5 mm captive screw connector, 3 pole
Contact closure pin confi gurations 1 = 10 VDC reference voltage
2 = variable voltage input for remote
volume control/muting
3 = ground
Extron remote key pad control ... (1) 3.5 mm captive screw connector, 3 pole