Filter
Top Products
To listen to the radio:
1. Turn the Power ON.
2. Slide the MODE switch
(RADIO/PHONO/CD) to RADIO.
Select AM or FM. See Figure 5
above.
3. Turn the TUNING knob until
you find your desired radio sta-
tion.
4. Turn the VOLUME control
knob clockwise to turn unit on.
Adjust the volume by turning
the
VOLUME knob.
5. For optimal recep-
tion, stretch the built-
in FM antenna out to is
fullest extension
(See
Figure 6). You will
find the antenna at the
lower back portion of
your 3-in-1 Classic
Radio.
Rotate and move the antenna
until you receive clear radio
reception.
To turn off the radio:
Turn the VOLUME control knob
counter-clockwise to turn unit
off.
To play a CD:
Follow these steps carefully:
Loading the disc
1. Turn the Power ON.
2. Slide the MODE switch
(RADIO/PHONO/CD) to CD. See
Figure 7 above.
4. Press the OPEN/CLOSE but-
ton to close the CD door. After a
while, the display shows the CD
total number of tracks and total
and playing time. First turn the
VOLUME control knob clockwise
to turn the unit on.
Slide the MODE switch
to CD.
Press the OPEN/CLOSE button
to open the CD compartment.
Insert a CD into the disc tray.
Make sure the CD is put into tray
with printed side up. Close the
CD door. See Figure 8.
5. Press the PLAY/PAUSE but-
ton to begin playing your
CD.
Press the STOP button to stop
playing your CD. Press the
PLAY/PAUSE button to pause
your CD.
ANTENNA
FIGURE 6: For optimal reception,
stretch the built-in FM antenna out
to is fullest extension.
AM/FM
SWITCH
FIGURE 5: Select AM or
FM in the Radio mode.
FIGURE 7: Slide the M
ODE
switch
(RADIO/PHONO/CD) to CD.
FIGURE 8: Press the
OPEN/CLOSE button to open
or close the CD door. Insert
a CD in to the disc tray.
1110
FIGURE 9: Pressing PAUSE/PLAY but-
ton will have the CD’s track number
and indicator lights blink. Once play is
resume the flashing will stop.