Filter
Top Products
13
ENGLISH
Pausing playback
Press the PAUSE button (J) to pause playback and the
indicator ring of the PLAY button (
y) blinks.
Press the PLAY button (
G) or the PAUSE button (J) to restart
playback.
Stopping playback
During playback, press the STOP button (H) to stop playback.
Opening and closing the tray
Pressing the OPEN/CLOSE button (L) opens the tray if it is
closed, and closes it if it is open.
< When the OPEN/CLOSE button (L ) is pressed during
playback, it may take a few seconds before the disc is
“unloaded” and the tray opens.
Selecting the playback area
There are two types of Super Audio CDs, regular ones that
contain 2-channel stereo and multi-channel stereo and hybrid
discs (two-layer discs) that contain Super Audio CD and
regular CD data.
To change the playback area, press the front panel MODE
button for 2 seconds or more while playback is stopped.
< Press the PLAY AREA button in stop mode to select a
playback area if you use the remote control.
Fast scanning
When playing back, use the SCAN button (m or ,) to
move backwards and forwards. Press the PLAY button (
G) to
restart playback at normal speed at the desired location.
Pressing the SCAN button (m or ,) repeatedly changes
the scanning speeds. There are three speeds. The blinking
speed of “<” or “>” on the display shows the current
scanning speed.
Fast
q Faster q Fastest q Playback at normal speed
< You can also use the SKIP button (. or /) of the main
unit. To start scanning (or to change the scanning speed),
press and hold the SKIP button for more than one second.