Filter
Top Products
18
Additional Settings (3)
Auto display darkening
Display: FLaOFF>***
Sets the time before the display turns off automatically when no
operation is done for the specific period of time.
The default setting is “30m”.
15m
Turns off the display automatically when no operation is done for
15 minutes.
30m
Turns off the display automatically when no operation is done for
30 minutes.
60m
Turns off the display automatically when no operation is done for
60 minutes.
OFF
The unit does not turn off the display automatically.
o If the display is left on with the same indication for a long
time, brightness irregularities can occur. For this reason, we
recommend that you enable automatic display darkening.
Returning to factory settings
Display: Setup>***
Memorized settings are stored even after the power cord has
been disconnected. If you have made changes through the setup
process, and want to restart from a known set of options, restore
the unit to the default factory settings as follows:
While “Setup>” is displayed, press the ON button to execute
the initialization process.
“Setup CLR” appears on the display and the unit returns to the
factory settings.
Creating your own input terminal name.
1 Press the INPUT buttons (</>) repeatedly until
“88888 ” appears while the input terminal name
(XLR1, XLR2, RCA1, RCA2 or RCA3) and “=” are displayed.
2 Press the ON button.
3 Input the letters.
Press the INPUT buttons (</>) to move the cursor.
Press the the VOLUME buttons (+/–) to select the letters.
o You can input up to 5 letters.
4 When you have finished inputting the letters, press the
ON button to confirm the selection.
Available Letters
Alphabet: A to Z, a to z
Numbers: 0 to 9
Symbols: ! " # $ % & ' ( ) * + , - . / : ; < = > ? @ (blank) 8