Filter
Top Products
8
1
Press the POWER button to turn the unit on.
The indicator ring lights when the unit is on.
< When connecting a power amplifier to the unit, make sure to turn
it on after turning on other devices.
< Also turn on all devices connected to the unit.
< When the master clock (MCK) is set to “WORD-IN”, “WRD UNLOCK!”
or “NO WORD” will appear on the display when the unit is turned on
as a word signal cannot be detected as soon as the unit is powered
up. These messages vanish when the word signal is locked.
2
Press the INPUT button to select an input.
Each press of the button changes input and the selected input
appears on the display as follows:
RCA1
OPT
XLR
RCA2
USB
Play back the source after selecting the source.
The text on the display flashes when a digital signal is not detected.
Turn on the connected device and check connections.
< The INPUT buttons (</>) on the remote control unit of an optional
P-05 can also be used.
< The remote control unit of the P-05 can also perform VOLUME
adjustment (–/+) and MUTING.
< Press the POWER button to turn off the unit after use.
Basic Operation
1
Press the MENU button repeatedly to select the menu item
to be changed.
Each press changes the display as follows:
CONV>***
DF>****
MCK>***
W-OUT>***
RC>***
DISP>***
OUT>***
DIMMER>***
If you press the INPUT button or leave the unit idle for 10 seconds,
the set-up mode will be cancelled.
< The SETUP button on the remote control unit of an optional P-05
can also be used.
2
Use the VOLUME buttons (–/+) to select the options within
the menu item.
Individual menu functions are described on pages 9-11.
< The INPUT button (</>) on the remote control unit of an optional
P-05 can also be used.
Settings (1)
Normal display