Filter
Top Products
15 Ethernet interface
Page 1
Connecteur 1 Connecteur 2
Pin Signal Pin Signal
1 TX+ 3 RX+
2 TX- 6 RX-
3 RX+ 1 TX+
6 RX- 2 TX-
14.ETHERNET INTERFACE
14.1.InterfaceEthernet
YoucanusetherecorderfromremotethankstoitsEthernetinterfaceandthe TCP-IPprotocol.
Plugtherecorderonyournetworkwithastraightcableontothe10/100BASE-T(RJ45)connector
locatedattherearoftheappliance.
Youcanusetherecorderonan Ethernetnetwork10Mbyte/sor100Mbyte/s.
IncaseofanetworkusingaBNCcable,youwillhavetouseanexternalHubtoconverttheBNC
signalintoRJ45 signal(useastraightcable).
IfyouonlyhaveaPCcomputerwithoutanetwork,youcanalsouseanordinary-laycabledirectly
betweenthePCandtherecorder.
Ordinarycable
Therecorderusesthe TCP/IPprotocoltodialogwiththePC.YoucanthengiveanIPaddresswith
asub-networkmask.
AskyournetworkmanageranIPaddresswiththecorrespondingmask.Afterentryofthevalues,
turntheapplianceoffandontovalidatethenewaddress.
Ifyoudon thaveanetworkmanager:
Checkthatthe TCP/IPdriverhasbeeninstalledonyourcomputer.
InthecaseofaPCwithWin95orWin98:
Startingfromthewindowsexplorer,goto"Workstation",then"Configurationboard",then
"Network".
Checkthatthe TCP/IPprotocolhasbeeninstalled,thenchecktheIPaddressandthesub-network
mask.
MakesurethatyourIPaddressandyourmaskarecompatiblewiththoseofthedistantcomputer.
Therecorderisusing Port23.
Forexample,inImode,youcouldhave:
PCIP=192135.20.00mask=255.255.255.0
RecorderIP=192.135.20.01mask=255.255.255.0
SeethedefinitionoftheclassesofIPaddresses.