Epson PowerLite Cinema 1040 Home Theater System User Manual


 
Setting Up Wireless Network Security
Parent topic: Using the Projector on a Network
Related references
Optional Equipment and Replacement Parts
Product Box Contents
Installing the Wireless LAN Module
To use the projector over a wireless network, install the Epson 802.11b/g/n wireless LAN module in the
projector. Do not install any other type of wireless module.
Note: The wireless LAN module is not included with your projector and is optional.
Note: Your product may look different from the illustrations in this guide, but the instructions are the
same.
1. Turn off the projector and unplug the power cord.
2. Insert the wireless LAN module into the USB-A port.
3. Plug in and turn on the projector.
The light on the wireless LAN module turns on when the module is installed and operating. The light
flashes when the module is communicating over the network.
Parent topic: Wireless Network Projection
50