Epson PowerLite Cinema 1040 Home Theater System User Manual


 
Solutions to Problems with the Remote Control
Solutions to Password Problems
Parent topic: Solving Problems
Solutions to Projector Power or Shut-Off Problems
If the projector does not come on when you press the power button or it shuts off unexpectedly, try the
following solutions:
Make sure the power cord is securely connected to the projector and to a working electrical outlet.
The projector's buttons may be locked for security. Unlock the buttons or use the remote control to
turn on the projector.
If the projector's lamp shuts off unexpectedly, it may have entered standby mode after a period of
inactivity. Press the power button to wake the projector and adjust the Sleep Mode Timer setting to
change the sleep interval.
If the projector's lamp shuts off, the Status light is flashing blue, and the Temp light is orange, the
projector has overheated and shut off. Check the solutions for this light status.
If the power button on the remote control does not turn on the projector, check its batteries and make
sure the Remote Receiver setting is turned on in the projector's menu, if available.
The power cord may be defective. Try another power cord. If that doesn't work, disconnect the cord
and contact Epson.
Parent topic: Solving Projector or Remote Control Operation Problems
Related references
Projector Feature Settings - Settings Menu
Projector Light Status
Where to Get Help
Related tasks
Unlocking the Projector's Buttons
Replacing the Remote Control Batteries
Solutions to Problems with the Remote Control
If the projector does not respond to remote control commands, try the following solutions:
Check that the remote control batteries are installed correctly and have power. If necessary, replace
the batteries.
Make sure you are operating the remote control within the reception angle and range of the projector.
167