Epson Home Cinema 3000 Home Theater System User Manual


 
3. Connect the other end of the cable to projector's HDMI 1/MHL port or the WirelessHD transmitter's
HDMI 5 / MHL (IN) port.
Parent topic: Connecting to Video Sources
Connecting to a Component Video Source
If your video source has component video ports, you can connect it to the projector using an optional
component video cable. Depending on your component ports, you may need to use an adapter cable
along with a component video cable.
1. Connect the component connectors to your video source's color-coded component video output
ports, usually labeled Y, Pb, Pr or Y, Cb, Cr. If you are using an adapter, connect these connectors
to your component video cable.
2. Connect the other end to the projector's color-coded Component video input ports.
32