Filter
Top Products
Power light Status light Lamp light Temp light Status and solution
Flashing blue Varies Off Flashing Projector is too hot
orange
• Make sure that the vents and air
filter are not clogged with dust or
obstructed by nearby objects
• Clean or replace the air filter
• Make sure the environmental
temperature is not too hot
Off Flashing blue Off Orange Projector has overheated and turned
off; leave it turned off to cool down for
about five minutes, then do the
following:
• Make sure that the vents and air
filter are not clogged with dust or
obstructed by nearby objects
• Clean or replace the air filter
• If operating the projector at high
altitude, turn on High Altitude
Mode
• If the problem persists, unplug the
projector and contact Epson for
help
Off Flashing blue Orange Off Lamp has a problem
• Check to see if the lamp is burned
out, broken, or installed incorrectly;
reseat or replace the lamp as
necessary
• Clean or replace the air filter
• If operating the projector at high
altitude, turn on High Altitude
Mode
• If the problem persists, unplug the
projector and contact Epson for
help
130