Filter
Top Products
Making Detailed Adjustments 41
Saving and Resetting Menu Selections
Once you’ve adjusted the picture settings, you can save them as a group using the Memory
feature. This lets you easily recall them, and switch from one group of settings to another.
If necessary, you can use the projector’s reset options to restore its factory-default settings.
You can clear all the settings, or just the settings in a specific menu.
Creating Memory Settings
After adjusting the picture to your liking, you can save your settings as a group in the
projector’s memory. This stores the Brightness and Contrast settings, White Level, Black
Level, Color Mode, and other color settings on pages 38 and 39.
1. Press the
Menu button on the remote control.
2. Open the
Memory menu, then select Save Memory.
3. Select the memory name you want to use (from Memory1 to Memory9), then press the
Select button to save your settings.
Note: Saved settings are indicated by a green highlight next to the memory name. If you
select a name that is already in use, the existing settings will be erased and new ones saved in
their place.
Recalling Memory Settings
Once you have created one or more memory settings, you
can easily recall them:
1. Press the
Memory button on the remote control.
2. Use the arrow buttons to select the desired setting, then
press the
Select button.
After a moment, the image appears on the screen using
your selected setting.
Memory
button