Filter
Top Products
Page 24
Page 25
RPA-1 Technical Specications
Rated Power Output: (Both Channels Driven @ 1Khz, 120VAC/ 60HZ supply, THD noted)
(Per Channel) 200 Watts into 8 Ohms (0.04%THD)
300 Watts into 4 Ohms (0.04%THD)
Frequency Response:
20-20Khz: +/-0.1dB
10-100Khz: +/-1.0dB
Total Harmonic Distortion (THD): (1Hz to 80kHz measurement bandwidth)
<0.015%
Signal-to-Noise Ratio: >100dB, Unweighted (Full Output Reference)
DC Oset: <1mV
Crosstalk: >75dB
Damping Factor: Approximately 200 into 8 Ohms
Input Sensitivity Range (Gain): 29dB
Input Impedance (XLR Input): 47K Ohm
Input Impedance (RCA Input): 47K Ohm
External Trigger Input: 5-12 VDC
Clearance for ventilation (Back): Minimum 2” / 50 mm
Electrical Power Requirement: 800 watts @ 115VAC when driven into 8 Ohms
Electrical Power Consumption: 4 Watts (Standby) and 46 Watts (Idle)
Raw Weight: 51 lbs / 23.18 kg
Shipping Weight: 59.5 lbs / 27.0 kg
Dimensions: 18.4375” W x 6” H x 16..4375” D
469mm W x 153mm H x 418mm D