Emerson Process Management ES30 Stereo System User Manual


 
35
General Precautions and Recommendations
When choosing a location for wall mounting remember that the main unit must
be connected to an AC outlet. The AC power cord of the main unit should be
able to hang straight down from the main unit to the AC outlet.
(See Figure 1.)
Connect the main unit to the AC outlet and position it against the wall in your
desired location. Make sure that the plug remains firmly and full inserted into the
outlet. There should be just enough slack in the power cord so that the plug can be
easily removed from, and reconnected to the AC outlet.
Have someone hold the main unit against the wall in the desired location and
make a pencil mark on the wall to indicate center point of the top edge of the
cabinet.
Correct
Incorrect
Figure 1.
Pencil Mark At Center
ES30_072905.p65 29/7/2005, 16:4135