Emerson Process Management ES30 Stereo System User Manual


 
15
MUTE Button (On Remote Control Only)
Press the MUTE button on the remotrol control to shut off the speakers temporarily,
for example, to answer the telephone.
The sound stops and the
MUTEindicator appears in the
display.
Press the MUTE button again to cancel the mute function and restore the sound.
The “MUTEindicator disappears.
The mute function will also be canceled automatically by pressing the VOLUME
or VOLUME buttons.
PHONES (Stereo Headphone) Jack
This system includes a stereo PHONES jack on the right side panel of the main
unit. You may connect a set of stereo headphones, not included, to this jack for
private listening without disturbing others.
The main speakers are automatically shut Offwhen headphones are connected
to the PHONES jack.
Make sure that the plug from your headphones is fully inserted into the headphone
jack. If the plug is not fully inserted the sound may be intermittent, or you may only
hear sound from one side of the headphones.
Important: To prevent hearing damage always set the volume control to a low
level before you connect the headphones. Then connect the headphones, put
them on, and very gradually increase the volume to a comfortable listening
level. Remember that CDs may contain both very soft and very loud passages.
Adjust the volume to a comfortable level using a louder passage, so that you
always know what the maximum level will be.
ES30_072905.p65 29/7/2005, 16:4115