Emerson MS7630 Stereo System User Manual


 
16
PLAYING CASSETTE TAPES
1.) To turn the system on, rotate the POWER ON/OFF-VOLUME control
downwards until a clickis heard, and set the Volume to a low level. The
POWER indicator comes on’.
2.) Open the cassette cover by pulling it outwards at the open tab.
3.) Open the cassette door by pressing the / key..
4.) Place a pre-recorded cassette tape into the slots on the inside of the door with
the exposed tape facing down and the full reel on the left side.
5.) Press the TAPE button to select Tape function. The TAPE indicator comes
on
6.) Press the cassette Play key to begin playback.
7.) Adjust the VOLUME and BBS controls as desired.
8.) To advance the tape rapidly press the key. To stop the tape before it ends
press the / key..
9.) To rewind the tape rapidly press the key. To stop the tape before it ends
press the / key..
10.) When the tape ends the Automatic Stop System releases the Play key and
shuts off the tape motor. You may then open the cassette door, remove your
tape, turn it over and play the other side if desired.
CASSETTE COVER OPEN TAB
MS7630_011504.p65 15/1/2004, 10:0616