Filter
Top Products
11
LISTENING TO THE RADIO
• Make sure that the main POWER switch on the back of unit is set to “ON”.
• Make sure that the FM Wire antenna is extended to its full length.
1.) To turn the system ‘on’, rotate the POWER ON/OFF-VOLUME control
downwards until a ‘click’ is heard, and set the Volume to a low level. The POWER
indicator comes ‘on’.
2.) Press the AM or FM button to select radio band as desired. The corresponding
Indicator comes ‘on’.
3.) Turn the TUNING control to tune to the desired radio station.
If you tune to an FM Stereo station, the FM ST indicator will come ‘on’.
4.) Adjust the VOLUME and BBS controls as desired.
5.) When you are finished listening turn the POWER ON/OFF-VOLUME control
upwards until a ‘click’ is heard. All indicators go ‘off’
HINTS FOR BETTER RECEPTION
FM: The FM lead wire antenna on the back panel should be extended to its full
length. You may also have to vary the direction of this antenna until you find
the position that provides the best reception.
AM: The AM bar antenna is inside the cabinet of the main unit. You may need to
change the position of the main unit until you find the position that provides
the best reception for your favorite AM stations.
MS7630_011504.p65 15/1/2004, 10:0611