Emerson MS7630 Stereo System User Manual


 
15
6.) After the last track has played the player stops and the display shows the total
number of tracks on the disc. However the program sequence remains in the
memory and the PROG indicator remains on. Press the PLAY/PAUSE
button to play the programmed sequence again.
7.) To cancel the programmed sequence from the memory press the STOP
button while the player is stopped. The PROG indicator goes off’.
The programmed sequence may also be canceled by removing the disc,
changing function to TAPE, AM, FM, or shutting the system off’.
Program Repeat Playback
You can use the Program and Repeat features together to continuously repeat a
programmed sequence of tracks.
First, program the desired tracks according to Steps 1 through 5 on page 14.
When Programmed Playback begins press the REPEAT button twice to activate
the All Tracks Repeat feature.
The REPEAT Indicator lights and all the
tracks in your programmed sequence will be
repeated continuously.
To cancel Programmed Repeat Playback press the STOP button until both the
PROG. and REPEAT Indicators go Off.
RANDOM PLAYBACK (Front Panel Only)
This feature allows you to play all the tracks on a disc in random order.
Load the disc as usual and wait until the display shows the total playing time and
number of tracks. Press the RANDOM button on the front panel. The RANDOM
indicator comes on. The tracks will be played in random order continuously.
To cancel the Random mode press the RANDOM button once more until the
RANDOM indicator goes off’.
MS7630_011504r.p65 15/1/2004, 12:1615