Filter
Top Products
17
Programmed Playback (On Front Panel Only)
This feature allows you to program up to 20 tracks on a disc for playback in any
desired order. You may also program a specific track to play several times within
the same program.
Note: You cannot program tracks while a disc is playing. If the disc is playing
press the STOP button first before beginning the programming steps below:
1.) Press the CD/TUNER button to select the CD mode, insert your disc in the
player, close the door, and wait until the total track number appears in the
display.
2.) Press the PROG./CLOCK button once. The MEMORY indicator begins flashing
in the display. “P01” appears briefly then “00” flashes.
3.) Press the or button to select the first track to
be programmed.
Example: Track 08.
4.) Press the PROG./CLOCK button once again to enter the track “08” in program
memory number “P01”.
“P02” appears briefly then “00” flashes again in the display, indicating that you
may now select a track to be entered in program memory number “02”.
5.) Press the or buttons to select the next track to be programmed.
When the desired track number flashes in the display press the PROG./CLOCK
button again to enter that track in the program memory.
MS7618R_062205.p65 22/6/2005, 15:0917