Filter
Top Products
11
LISTENING TO THE RADIO
1.) Press the POWER/STANDBY button on the top panel or on the remote control
to turn the system ‘On’. The STANDBY indicator goes ‘Off’ and the main display
comes ‘On’.
2.) Press the TUNER/BAND button on the top panel or remote control to select
the Tuner function, and press again to switch between AM and FM bands. The
display will show an AM or FM frequency.
3.) Press the TUNING (SET) or buttons on the top panel or on the remote
control to tune to the desired station.
• Manual Tuning – repeatedly press the TUNING (SET) or buttons until
the display shows the frequency of the desired station.
Note: Use this method to tune in weaker stations.
• Automatic Tuning –Press and hold the TUNING (SET) or buttons
until the display begins to move, then release the buttons. The tuner will search
up or down for the first strong station and stop on that station. Repeat until the
tuner stops on the desired station.
4.) Press the VOLUME or buttons on the top panel or on the remote
control to adjust the volume.
5.) Adjust the Equalizer and BASS BOOST controls as desired.
6.) When you are finished listening press the POWER/STANDBY button on the
front panel or on the remote control to turn the system ‘Off’. The main display
goes ‘Off’ and the STANDBY indicator comes ‘On’ again.
FM
MHz
ES13_draft090902.p65 9/9/2002, 17:3711