Filter
Top Products
3. Place the sensor into the bracket.
4. Secure the sensor in the bracket with the supplied fasteners.
CMFS025, CMFS040, or CMFS050 wall mounted using bracketFigure 2-11:
2.7 Secure wafer-style process connections
A wafer-style connection lets you clamp the sensor into the pipeline. A wafer installation
kit is shipped with a wafer-style sensor.
1. Make sure that the bolts provided are rated for your process connection.
2. Slip the sensor alignment rings over each end of the sensor wafer, then insert the
sensor between the process connections in the pipeline.
Tip
Micro Motion recommends installing gaskets (user-supplied).
Mounting
Installation Manual 17