Filter
Top Products
19
VIDEO OPERATIONS
Playing Video sources
1. Select the DVD, VIDEO 1, VIDEO 2 or VIDEO 3
modes by rotating the INPUT SELECTOR.
2. Play the component corresponding to the INPUT
selected.
3. The picture from the video source can be seen on the
TV and the sound from the video source will be
heard from the speakers.
NOTE: When the different video source from the DVD
or VCD connected to this Amplifier, you must connect
the corresponding source output to the TV set, otherwise
you can’t see the picture on the TV set. For example,
when the source from the DVD to the Amplifier is YUV,
you must connect the YUV output on the Amplifier to the
YUV input on the TV set. Similarly, if the video source to
the Amplifier is video/s-video, the output from the
Amplifier to the input on the TV set must be
video/s-video.